Blue Tooth From Mac Book to Ue Boom

After updating to iOS 13, you will need to allow the app to access Bluetooth. To do so, in your iOS Settings, go to your speaker's app settings and turn on the Bluetooth access.

In case you have installed the app after the iOS update, you will be prompted with a message requesting Bluetooth access for the app. In this case, just click on "OK" to give access.

A: If your ULTIMATE EARS BOOM looks like it needs a pick me up after a few too many long nights and crazy adventures, try the following to renew it.

Cleaning the acoustic skin (i.e. the fabric)

You'll need a water wand or a spray bottle, dish soap, and soft bristle brush.

• Make sure your ULTIMATE EARS BOOM is turned off
• Moisten the fabric on your ULTIMATE EARS BOOM with water using a water wand or spray bottle.
• Wet a soft bristle brush with soapy water and lightly scrub the skin of your ULTIMATE EARS BOOM.
• Quickly rinse the soap off or wipe with a damp cloth and let dry.

Cleaning the rubber spine

You'll need a cotton or microfiber cloth and a common household cleaner, like isopropyl alcohol or window cleaner. Or you can use disinfectant wipes.

1. Apply some cleaning solution to the microfiber cloth.
2. Wipe the rubber strap as well as the top and bottom caps.
3. Wipe any excess cleaning solution off with a dry cloth.

A: Contacting Customer Care about the ULTIMATE EARS BOOM

If you need technical support for your ULTIMATE EARS BOOM, please have this information available:

• Serial Number (S/N
• Part Number (P/N)
• Model Number (M/N)

 The product information is located on the bottom of the speaker.

A: Setting up ULTIMATE EARS BOOM

You can connect your ULTIMATE EARS BOOM to your smartphone, tablet or other device using either Bluetooth® or the auxiliary input.

Bluetooth®

Out of the package, your ULTIMATE EARS BOOM is ready to pair with your first Bluetooth® device. Here's how:

1. 1. Turn the speaker on by pressing the power button on the top of the speaker. The power indicator will glow white, the Bluetooth® connect button (above the power button) will blink white rapidly, and you will hear a tone indicating the speaker is ready to pair.
   2. On your device, go to the Bluetooth® menu and scan for devices (make sure Bluetooth® is enabled).
   3. SelectULTIMATE EARS BOOM from the list of devices.

NOTE: ULTIMATE EARS BOOM volume is set to maximum when you pair it to an iOS device.

Once paired and connected, you'll hear an audible confirmation from the speaker. This means your ULTIMATE EARS BOOM is ready to use. You can pair additional devices with your speaker.

Auxiliary Input

1. Turn the speaker on by pressing the power button on the top of the speaker.
2. Connect the speaker to your device using a 3.5mm analog cable (not included). NOTE: Use only a 3-pole (non-microphone or inline remote cable) auxiliary cable.

NOTE: The USB connection is solely for charging and updating your ULTIMATE EARS BOOM. It won't enable you to use your speaker as an audio-output device when connected to a computer.

While updating your ULTIMATE EARS app on an Android 6 (Marshmallow) mobile phone, you may see the following error:

If you experience this issue, please follow the instructions below:

• In the Google Play Store, tap on UNINSTALL button
• Agree to uninstall the speaker app - it only takes ~5–10 secs
• Once the speaker app is uninstalled, the INSTALL button will appear
• Tap INSTALL and the speaker app should install successfully

A: You can double up your ULTIMATE EARS MEGABOOM and ULTIMATE EARS BOOM. However, they can only play back in standard Double Up mode, and cannot switch to Stereo mode. Using the speakers in Stereo mode won't give you the best experience, as the sound signature for each speaker is different. Please see the Immersion Guide in the app for more details on the difference between Stereo and Double modes.

A: No, all ULTIMATE EARS BOOM models carry the same 2 year limited warranty.

A: So you got ULTIMATE EARS BOOM as a gift and there was a custom message for you when you turned it on. Love it? Keep it forever. Not so much. No worries, you can disable the custom message via the 'Settings' menu on the ULTIMATE EARS BOOM mobile app. Just flip the 'Custom Message' switch to 'Off'. When the message is turned off, the standard 'Power On' sound will take its place. To turn the message back on at any time, flip the switch back to 'On'. You can download the latest version of the app here: iOS | Android iOS link: https://itunes.apple.com/us/app/ue-boom/id632344648?l=en&mt=8 Android link: https://play.google.com/store/apps/details?id=com.logitech.ueboom&hl=en

A: Your ULTIMATE EARS BOOM always sets a backup alarm on both the speaker itself and on your source device, just in case something goes wrong. For Apple devices, ensure that your device'sRinger andAlert settings are enabled by sliding theChange with Buttons setting toON. To find this setting, go to:

For iOS 5.1.1
Settings >> General >> Sounds >> Ringer and Alerts

For iOS 6.x and 7.x
Settings >> Sounds >> Ringer and Alerts

A: Just like you, we use our ULTIMATE EARS BOOM all the time. The more we used it though, the more we started to feel that the jumps in volume at the lowest volume steps were too great. Specifically, it wasn't always easy to find the 'perfect' volume–the music seemed just a little too loud or little too quiet.

To fix this, we smoothed out the volume steps to make them a little closer together and we made the increases in volume more consistent. Whereas the first few of steps previously increased the volume by an average of 8 or 9 decibels, the volume increase in the first steps now averages closer to 5 decibels. For you this means that finding the perfect volume for any song is now much easier. And don't worry, this has no discernible impact on the max volume of ULTIMATE EARS BOOM; just in how you get there. And for inquiring minds, here is a chart that demonstrates the exact differences between the previous volume steps and the new volume step.

A: You can set your alarm to repeat by selecting the "Daily Repeat" option. You can only set one alarm, however, and can not set multiple alarms for different times of day.

A: A backup alarm will play on your phone or tablet.

A: Your alarm will play on the primary ULTIMATE EARS BOOM that it was connected to when the alarm was set up. It will not play on two ULTIMATE EARS BOOMs, even if you last used them in Double Up mode.

A: When you cross different time zones, your ULTIMATE EARS BOOM alarm will NOT automatically change to the new time zone even if the clock on your phone changes. You have to adjust the alarm time in the ULTIMATE EARS BOOM app manually.

A: Most music services work with the ULTIMATE EARS BOOM alarm, including popular services like Spotify and Pandora. To use a music service with the alarm:

• Play the music you would like from music service. This can be a specific song, a playlist or a radio station.
• Then go to the alarm settings in the ULTIMATE EARS BOOM app and select "Last Music Played".

A: If your alarm played the backup alarm sound instead of the music you selected, check the following:

• The music service or internet radio app you selected may not have activated.Your phone may be out of range of your ULTIMATE EARS BOOM -- make sure the two devices are within 50 feet of each other.
• The Bluetooth connection is Off on your phone or your phone is in Airplane mode -- make sure you keep the Bluetooth connection On.
• Your phone may be off or out of battery -- make sure your phone is On (your alarm will still play if your phone is Locked)
• Your phone may have lost the connection to the internet/network.

A: If your alarm played on your phone instead of your ULTIMATE EARS BOOM, check the following:

• Your phone may be out of range of your ULTIMATE EARS BOOM -- make sure the two devices are within 50 feet of each other.
• The Bluetooth connection is Off on your phone or your phone is in Airplane mode -- make sure you keep the Bluetooth connection On.
• Your ULTIMATE EARS BOOM has no power -- be sure the battery on your ULTIMATE EARS BOOM is charged or the ULTIMATE EARS BOOM is connected to a power source.
• Someone else is using your ULTIMATE EARS BOOM when the alarm is scheduled to go off.

A: The alarm will still go off on your ULTIMATE EARS BOOM with the back up alarm sound instead of the music you chose. To cancel the alarm, connect your ULTIMATE EARS BOOM to another phone or tablet and go through the normal alarm menu.

A: Your alarm should still activate, but it may default to the Last Music Played option (instead of specific tracks from your Music Library) or ring the back up alarm.

A: That song will repeat until you turn the alarm off. After 1 hour, the alarm will turn itself off. If you snooze your alarm, it will play for an hour from the last snooze.

On your phone or tablet:

• Snooze by tapping the Snooze icon.
• Turn off your alarm by swiping the arrow from left to right.

On your ULTIMATE EARS BOOM:

• Snooze by pressing the Bluetooth button once.
• Turn off the alarm by pressing the power button.

Snooze will delay the alarm by 10 minutes. If you don't snooze or turn your alarm off, your music will continue to play for an hour.

A: You have two options when selecting the alarm music on your ULTIMATE EARS BOOM:

Last Music Played:

Choosing this option allows you to set the alarm music with the last song that was played from your phone or tablet. This can be music that is stored on the device itself or it can be music that was played from a music service (e.g. Spotify, Pandora, Deezer, etc). In the case of music services, you can select a specific song, a playlist or even a radio station.

My Music Library:

Choosing this option allows you to set the alarm music with any song(s) from the local music library on your phone or tablet.

A: Before you can set an alarm on your ULTIMATE EARS BOOM, you will need to make sure that you have the latest version of the ULTIMATE EARS BOOM app and that your ULTIMATE EARS BOOM is up-to-date. The newest version of the app will tell you if your ULTIMATE EARS BOOM is up to date or not.

To download the app, please visit Google Play or the iOS App Store.

To update your ULTIMATE EARS BOOM, visit: www.ultimateears.com/update.

A: If your ULTIMATE EARS BOOM turns off with a "Critical Battery" message even though it's fully charged, it's usually due to a temporary problem where the charge can't be detected. Here's how to resolve it:

1. Plug your speaker into a USB port on your computer using the supplied USB cable.
2. Turn your ULTIMATE EARS BOOM on. NOTE: Your operating system may install USB software automatically.
3. Disconnect your ULTIMATE EARS BOOM from your computer.
4. Turn your ULTIMATE EARS BOOM off and then back on.

Your ULTIMATE EARS BOOM battery error should now be corrected.

A: Some smartphones and other devices are NFC-enabled. You can use NFC to connect your device to your ULTIMATE EARS BOOM. Here's how:

1. 1. Make sure NFC is enabled on your device (see your device's documentation for help).
   2. Turn on your ULTIMATE EARS BOOM.

NOTE:

You might need to place your speaker in pairing mode. Hold down the Bluetooth connect button (above the power button) on your ULTIMATE EARS BOOM until you hear a tone.
1. Hold your device near your ULTIMATE EARS BOOM (right below the Volume + and – buttons) for up to 10 seconds.
2. If prompted by your device, confirm the pairing.

You'll hear an audible confirmation from your ULTIMATE EARS BOOM when the pairing is complete.

IMPORTANT: Your ULTIMATE EARS BOOM stays in pairing mode for 3 minutes. Be sure to try and pair using NFC within 3 minutes.

Additional information

If you aren't able to pair using NFC, see "Setting up ULTIMATE EARS BOOM" to pair using Bluetooth.

A: The ULTIMATE EARS BOOM app might crash on your Android device if you have two Bluetooth devices connected to your ULTIMATE EARS BOOM. To fix this issue, try the following:

1. Disconnect the second Bluetooth device from your ULTIMATE EARS BOOM. NOTE: You can disconnect it from the Bluetooth devices menu, or turn the device's Bluetooth connection off completely.
2. Stop and restart the ULTIMATE EARS BOOM app on the Bluetooth device you want to use.

If this doesn't work, try the following:

1. Turn your ULTIMATE EARS BOOM off, and then back on again.
2. Stop and restart the ULTIMATE EARS BOOM app.

First, you will need to have connected the two ULTIMATE EARS BOOMs together at least one time. If you have not done that, then they won't know to look for each other and will not connect to each other. The easiest way to do this is via the Double Up section of the ULTIMATE EARS BOOM app. If they have already been Doubled Up together in the past, then perhaps you may have connected one of the two speakers to another phone or source device. In this case, you will need to Double Up again to reintroduce the two speakers to each other. If that isn't the case and your ULTIMATE EARS BOOM is not a polygamist then please make sure that both of your ULTIMATE EARS BOOMs are up to date with the new features. You can update your ULTIMATE EARS BOOM here.

If your ULTIMATE EARS BOOM is running version 5.x or 6.x, yes, it can Double Up with ULTIMATE EARS MINI BOOM. If your ULTIMATE EARS BOOM is running version 7.x or 8.x, however, no, it cannot Double Up with ULTIMATE EARS MINI BOOM.

Your ULTIMATE EARS BOOM and ULTIMATE EARS MEGABOOM Double Up in the same way as they would with another ULTIMATE EARS BOOM or ULTIMATE EARS MEGABOOM. See "Using the ULTIMATE EARS MEGABOOM Double Up feature" for more information.

Make sure your ULTIMATE EARS BOOM has the latest ULTIMATE EARS BOOM software. ULTIMATE EARS BOOM update version 7.x and 8.x allow for compatibility with ULTIMATE EARS MEGABOOM, but versions 5.x and 6.x do not. To download the latest ULTIMATE EARS BOOM update.

A: If you have two ULTIMATE EARS BOOM speakers, you can use them together to amplify your sound. Here's how:

1. Connect your first ULTIMATE EARS BOOM to your Bluetooth device.
2. Open the ULTIMATE EARS BOOM app and tap the "Double Up" icon.
3. Turn on your second ULTIMATE EARS BOOM.
4. Tap Start in the ULTIMATE EARS BOOM app.
5. Press the Bluetooth connect button on your second ULTIMATE EARS BOOM twice quickly.

The two ULTIMATE EARS BOOMs will now be connected to your Bluetooth device.

"Double Up" modes

The ULTIMATE EARS BOOM app lets you choose between these two "Double Up" modes:

• Double - Expands the audio to the two ULTIMATE EARS BOOM speakers for double the sound.
• Stereo - Turns the two ULTIMATE EARS BOOM speakers into Left and Right speakers (you can also swap left and right assignments using the app).

NOTE: The "Double Up" feature can only be used with one connected Bluetooth device at a time.

A: If you have multiple ULTIMATE EARS BOOM speakers connected to one or more iOS devices, you might not be able to select which speaker to use with the iOS Airplay menu.

If you have two Bluetooth sources, try disconnecting the second source and use only one source.

For the best experience, install the ULTIMATE EARS BOOM app to manage switching between speakers.

There are two ways to check your speaker's current battery level. Button press

• Press your speaker's 'plus' and 'minus' buttons at the same time. An audio message will play telling you the current battery level. You can change the language of the message from within settings section of the app.

ULTIMATE EARS BOOM app

1. Open the ULTIMATE EARS BOOM app.
2. Tap the +/- area on the ULTIMATE EARS BOOM on the home screen to display the battery life while your speaker is on.

A: Some devices will hold a connection with ULTIMATE EARS BOOM even when the stream is paused or the connection is idle.

To fix this issue, try the following on the device you no longer want to use:

• Disconnect from the ULTIMATE EARS BOOM.OR
• Turn off the Bluetooth connection.

This should allow another device to connect to your ULTIMATE EARS BOOM.

A: If your iOS device no longer connects to your ULTIMATE EARS BOOM, try the following:

• Turn your ULTIMATE EARS BOOM off and then back on.
• Turn your iOS device off and then back on.

If your iOS device still won't connect, you should re-pair your device with the ULTIMATE EARS BOOM. Here's how:

1. In the Bluetooth menu on your iOS device, locate ULTIMATE EARS BOOM and tap the arrow next to it.
2. TapForget this Device.
3. Turn your speaker on.
4. Hold down the Bluetooth button (above the power button) until you hear a tone.NOTE: The Bluetooth connection button will blink rapidly, meaning the speaker is ready for pairing.
5. On your device, go to the Bluetooth menu and scan for devices.
6. TapULTIMATE EARS BOOM to pair.

A: Audio distorted or dropping out when streaming to ULTIMATE EARS BOOM

If you're having trouble with audio distortion or drop-outs on your ULTIMATE EARS BOOM, try these suggestions:

• Move the audio source closer – it might be out of the range of your speaker.
• Move away from other sources of wireless signal – you could be experiencing interference.
• Make sure your speaker has enough battery power (connect it to a power source with the supplied adapter).
• Adjust the volume on both the audio source and your speaker.
• Restart both your speaker and the audio source.
• Re-pair your device with your speaker (see, "How do I pair additional Bluetooth® devices with my speaker?").
• If you're using two ULTIMATE EARS BOOM speakers (for Double Up), try disconnecting and streaming to one speaker only.

NOTE: If you're streaming audio content from the internet, the issue could be with the internet connection and not your speaker.

A: The ULTIMATE EARS BOOM was designed to be used with a 3-pole (non-microphone or inline remote cable) auxiliary connector.

You may experience unexpected behavior with controls if you use a 4-pole (with inline microphone and/or inline remote) auxiliary cable. Only use a 3-pole cable with your ULTIMATE EARS BOOM.

A: The volume settings between your ULTIMATE EARS BOOM and Apple device can sometimes get out of synchronization. If this happens, try the following:

• Turning the Bluetooth connection on your device Off, then back On again.
• Turning your device Off, and then back On.

A: You may experience audio problems if one of the two devices keeps requesting the connection while the current device is streaming. If so, try the following:

• Pause the stream from the second device that isn't currently being used.
• Turn Bluetooth off on the second device.
• If the primary Bluetooth device is a Macintosh computer, select "Don't use this device" from the Bluetooth preference pane in System Preferences.

A: Bluetooth® device not connecting to the ULTIMATE EARS BOOM

If your Bluetooth® device won't connect to your ULTIMATE EARS BOOM, try the following:

• Make sure your device is paired with your speaker and Bluetooth® is active (see, "How do I pair additional Bluetooth® devices with my speaker?").
• Place your Bluetooth® device closer to the speaker – it might be out of range.
• Move your Bluetooth® device and speaker away from other wireless sources – you could be experiencing interference.
• If you have multiple ULTIMATE EARS BOOM speakers, make sure you're connected to the correct one.
• The ULTIMATE EARS BOOM can be connected to up to two devices at a time -- make sure you don't already have three devices connected.
• Turn yourULTIMATE EARS BOOM Off, then back On again.

NOTE: If this is the first time you're pairing a device with your speaker, you don't need to press the Bluetooth® connection button. It comes out of the box ready to pair.

A: Using the ULTIMATE EARS BOOM with multiple connected devices

Your ULTIMATE EARS BOOM can have eight devices paired with it, and you can connect to two at a time. This lets you quickly switch to a second device to play audio without having to go through the connection process again. Here's how:

1. Connect the first paired device to your speaker by selecting it from the device's Bluetooth® menu. NOTE: If you haven't paired any devices, see "How do I setup my ULTIMATE EARS BOOM"
2. Connect a second device to your speaker the same way you did in step #1. NOTE: If you haven't paired any additional devices, see "How do I pair additional Bluetooth® devices with my speaker?"
3. Once you have two devices connected, you can start playing audio from one of them.
4. To switch and play audio from another connected device, pause the current one. Then, start playing the other.

A: Yes, some smart devices (smartphones and tablets) come equipped with a newer technology called Bluetooth Smart (or Bluetooth Low Energy, BLE). This feature is required to turn your speaker on and off remotely within the (ULTIMATE EARS BOOM / ULTIMATE EARS MEGABOOM) app. Go to the following page to get a comprehensive list of Bluetooth Smart and Bluetooth Smart Ready devices. Bluetooth Smart Note: This list may not contain all of the latest devices that are compatible with Bluetooth Smart. Refer to your device's support documentation or contact your device's manufacturer for more information. Make sure Bluetooth Smart is on

1. Connect your ULTIMATE EARS BOOM or ULTIMATE EARS MEGABOOM to your smart device
2. Open the ULTIMATE EARS BOOM or MEGABOOM app (make sure you have the latest version of the app, check the Apple App Store or Google Play Store for the latest version of the ULTIMATE EARS BOOM or ULTIMATE EARS MEGABOOM App)
3. Tap More, then Settings
4. Find the Bluetooth Smart setting at the bottom of the screen and make sure it is set to "On"

Additionally, not all speakers will support this feature. Supported: ULTIMATE EARS MEGABOOM ULTIMATE EARS BOOM with firmware 8.1.121 or 7.1.133 and later Unsupported: ULTIMATE EARS BOOM with firmware 6.8.58 or 5.8.58 and older ULTIMATE EARS MINI BOOM

A: You can connect your ULTIMATE EARS BOOM to a Macintosh or PC that has Bluetooth capabilities.

Macintosh

1. From the Apple menu, select System Preferences.
2. Open the Bluetooth preference pane.
3. Click "+" to add a new Bluetooth device.
4. Turn the speaker on.
5. Hold down the Bluetooth button (above the power button) until you hear a tone.NOTE: The Bluetooth connection button will blink rapidly, meaning the speaker is ready for pairing.
6. SelectULTIMATE EARS BOOM from the list of available devices and clickContinue.

IMPORTANT: The ULTIMATE EARS BOOM can also be a speakerphone, and the Macintosh operating system sets it as a headset device by default.

To set ULTIMATE EARS BOOM as a stereo speaker on your Mac:

1. From the Apple menu, select System Preferences.
2. SelectSound.
3. On theOutput tab, you'll see both "ULTIMATE EARS BOOM" and "ULTIMATE EARS BOOM Stereo" select "ULTIMATE EARS BOOM Stereo".
4. Close System Preferences.

PC

1. Turn the speaker on.
2. Hold down the Bluetooth button (above the power button) until you hear a tone.NOTE: The Bluetooth connection button will blink rapidly, meaning the speaker is ready for pairing.
3. Open your Control Panel.
4. SelectHardware and Sound.
5. SelectDevices and Printers.
6. SelectBluetooth Devices.
7. ClickAdd a device.
8. SelectULTIMATE EARS BOOM from the list of devices, and then click next.

NOTE: If the Bluetooth Device Control window opens, expand theHeadset type menu and select "My hands-free device ULTIMATE EARS BOOM does not have a display" and then clickApply.

Once your speaker is paired and connected, you'll have to select the ULTIMATE EARS BOOM as the default playback device in the Windows Sound settings. Here's how:

1. Open your Control Panel.
2. SelectHardware and Sound.
3. SelectManage audio devices (underSound).
4. Select "Speakers Bluetooth Hands-free Audio" and clickSet Default.
5. ClickOK.

A: Using the ULTIMATE EARS BOOM as a speakerphone

You can use your ULTIMATE EARS BOOM as a speakerphone once it's turned on and connected to your cell phone. Here's how:

1. Make or answer a call on your phone.
   1. A.iPhone – You'll have the option to take the call on yourULTIMATE EARS BOOM (speakerphone) directly on your phone. Select "audio source" from the In-call menu, then tapULTIMATE EARS BOOM to use it as a speakerphone.
   2. B.Android – On most Android smartphones, the call will default toULTIMATE EARS BOOM (speakerphone). Turn Headset mode off on your smartphone to take the call directly
2. Adjust the call volume from either the phone or speaker.
3. When you're finished with the call, end the call on your phone.

NOTE: Skype may or may not work on a Bluetooth speakerphone. This depends on your smartphone's make and model, and Skype settings.

A: Connect additional Bluetooth® devices to the ULTIMATE EARS BOOM

Your ULTIMATE EARS BOOM can store up to eight paired devices in memory..

After you pair the first device (see, "How do I setup my ULTIMATE EARS BOOM"), here's how to pair additional devices:

1. Turn the speaker on.
2. Hold down the Bluetooth® button (above the power button) until you hear a tone. NOTE: The Bluetooth® connection button will blink rapidly, indicating that the speaker is ready for pairing.
3. On your device, go to the Bluetooth® menu and scan for devices.
4. SelectULTIMATE EARS BOOM from the list of devices.

Once paired and connected, you'll hear an audible confirmation from the speaker. Your ULTIMATE EARS BOOM is now ready to use with the device you added.

NOTE: While the speaker can store up to eight paired devices, it can only maintain an active connection with two of them at a time.

Reconnecting to a device

To reconnect a device after the initial pairing or after pairing another device:

1. Turn the speaker on
2. On your device, go to the Bluetooth® menu and select ULTIMATE EARS BOOM from the list of devices.

Once reconnected, you'll hear an audible confirmation from the speaker. Your ULTIMATE EARS BOOM is now ready to use with the device you selected.

A: Yes, the download is safe. Since you are downloading the Update Assistant directly from Ultimate Ears and not the Mac App Store, you will be prompted to allow this application to install on your Mac. To override the settings and open the Update Assistant anyway:

1. In the Finder, locate the Update Assistant. Don't use Launchpad to do this. Launchpad doesn't allow you to access the shortcut menu.
2. Press the Control key, then click the Update Assistant icon.
3. Choose Open from the shortcut menu.
4. Click Open.

Head to Apple.com for more information on their security settings.

Update using the app

Your ULTIMATE EARS speaker gets better all the time through regular, over-the-air updates. These updates are quick and easy and can be wirelessly downloaded through your ULTIMATE EARS speaker app. To get started, connect your ULTIMATE EARS speaker to your smart device, open the app for your ULTIMATE EARS speaker, and tap on "More" to see if there are updates available. If there are, just tap to begin the update and the app will take care of the rest.

Update without the app

While it is quickest and easiest to update over-the-air with the app for your ULTIMATE EARS speaker, if you can't update using the app or you simply prefer to use an old-school desktop updater, we've still got you covered. Click on the Mac or Windows download link below to download the update utility. After you download the app, run it and follow the on-screen instructions. You'll need to connect your ULTIMATE EARS BOOM to your computer to complete the update.

REQUIREMENTS:  This update supports Windows 7 and above, Mac OS X (10.8.x) and above.

MAC OS X UPDATE WINDOWS UPDATE

A: Yes, there are replacement accessory parts you can get for your ULTIMATE EARS BOOM.

• Removable D-ring with 1/4-20 tripod mount
• USB/Aux protective cover (removable)
• Charging adaptor and USB Cable

If you need a replacement part, please contact support to obtain a replacement.

A: You can change the way your speaker is displayed in the ULTIMATE EARS BOOM app.

Android Device

1. Connect your device to your ULTIMATE EARS BOOM.
2. Open the ULTIMATE EARS BOOM app.
3. Tap theSettings icon.
4. TapSpeaker name and enter the new name for your speaker.

NOTE: You might have to un-pair and re-pair your speaker for the changes to take effect.

For Android, you can also change the display name of your ULTIMATE EARS BOOM in the Bluetooth device menu. Here's how:

1. Open your Bluetooth device menu.
2. Locate your ULTIMATE EARS BOOM and tap theSettings icon next to it.
3. TapRename and enter the new name for your speaker.

iOS Device

1. Connect your device to your ULTIMATE EARS BOOM.
2. Open the ULTIMATE EARS BOOM app.
3. Tap theSettings icon.
4. TapSpeaker name and enter the new name for your speaker.

You can't change the display name of your ULTIMATE EARS BOOM in the iOS Bluetooth device menu.

NOTE: You might have to un-pair and re-pair your speaker for the changes to take effect.

If you've updated to the latest ULTIMATE EARS BOOM software version you will no longer be able to revert your ULTIMATE EARS BOOM software to the previous version. Additionally, once you do update your BOOM you will not be able to Double Up your BOOM to any other BOOM that is on a previous software version.

For the best experience, we recommend connecting to one speaker through Bluetooth. However, industry-wide, for all Bluetooth devices, there will always be some latency (audio lag) when viewing videos, and the amount of the audio latency is specific to the video application and OS. The lowest latency, with a single speaker, is around 250 milliseconds. To most people, this is not a noticeable latency that negatively affects the video viewing experience.

We have been informed by some customers that there is a noticeable latency that negatively affects the video viewing experience when connecting the speaker to a 3.5mm auxiliary cable. We are actively working to identify a solution to this issue and will update our website FAQs, Google Play and Apple App stores.

russellonewalre.blogspot.com

Source: https://support.ultimateears.com/en/boom/

Share this post